Видео

I’ve sat on a maxnomic and it feels like the seats on frontier airlines. I have the microcenter inland lightning gaming chair which has a medium feel it’s a little more than firm enough to not allow my buns compress all the way down but not too firm, the build quality is solid, and it’s a super comfortable chair.

2404 vlz4, had a problem with the digital fx display and the mixer was creating a popping noise. I opened the board, unplugged the fx pcb, turned the board on and the channels seemed fine with no popping. I reinstalled the ribbon cable on the fx pcb, and suddenly everything works. I don't know if its a permanent fix but there's zero repair info to find online for the 2404 vlz4. I do see a similar part number online for the fx pcb but my last 2 digits are not labeled on my board. Hope this may help anyone with this board or the 32 channel.

Where did you get the rotor?

sad i tried to remove the switches but they are kind of glued to the circuit board therefore i kind of damaged a connector and no longer have a functioning right ctrl key

Thank you! 🎼🎤🎵🎶

Thank you! Bought a Pro+ from Ebay, and I didnt know why my batteries werent working. Bought a new battery, didnt help. I ended up seeing videos online and all the batteries were showing bluelights and mine was green. This video helped a bunch! Thank you. You saved me $200+ dollars!

Watched the bonus footage, the pad hardly moved and he only uses 50% of the mouse pad surface, yet complain the mouse pad is too small.

why don't you have a link for the desoldering tool?

Thanks for this! I ordered a strip that has 300 aLEDs on it and was annoyed to plug it into my mobo and find that exactly 120 of them seem to work. I had thought it was defective since ASUS says it supports up to 500, but I had a feeling that they might be misleading since it says that it can address up to 500 LEDs, aka control 500 of them, but nothing about how many it could power from the header.

My pwm fan controller makes so much coil noise

Don't like the presentation.

I like the Neewer NW 700 kit.. it sounds good, looks good, and you get all the accessories… for just $36

Why does the data signal stop, how does that work?

So in theory I can use the power from an unused argb port from the motherboard and connect the data(/ground) from the argbfan hub that is controlled with the frontpanel. My bequiet 500fx case controller only supports 30 leds(when all 3 pin ports are used).

Informative and useful video. Thank you for making the video!

Thank you, I was so confused about how to do this before seeing your video.

Very nice video 😊

Thanks. Good demo

So you press it out and press it in with the top side of the wheel facing up?

Very useless video

Ty realy thanks. im eletrician. and i thinks like u...thermaltake controller its realy stupid. So i started to look on internet for found a diagram cable, but in itlalin language i didnt found nothing. But now i have found u with your fantastic work.. ty man. so i can control my fan with aura sync.. ty very much man. I'm enjoying. P.S. Sorry for my bad english i hope u understand.

Thank you for thye video I will give it a try

I'll be grateful for the rest of my life. Thank you for making this video and for figuring out the pinout - it has truly made my day. I'm working on a similar project and was frustrated by ThermalTake's lack of detailed information when purchasing their fans on Amazon. Your video and contribution have been immensely helpful. I greatly appreciate it and offer a virtual fist bump in gratitude. 🤜🏻💥🤛🏻

I have the exact problem with noise, but the mic I use doesn't have a separate port for power and sound. Is there anything I could do? Would it be possible to have a split cable between a microphone jack for sound and a USB cable for power? Great video by the way

I got my square belt kit and the best size was diameter 35mm.

can you explain what the settings are doing?

I have had my Maxnomic for 7 years it started off hard, but it breaks in after a few months and is amazing after that.

Magic how did you get the pcb out since mine seems stuck to the aluminium, you skipped that step

Honestly just sell it, get the K100 with OPX switches as they are classic hot swappable switches.

can I set different color mode for individual devices with this device? since aura creator allows you to create new lightning effects and my motherboard has only 1 argb header .

where does the pwm cable ?

Gateron - G Pro 3.0 it will fit?

Yeah I just finished doing this, took forever on a keychron k6 pro. I had Brown switches with clear housing, so I swapped the housing and it ended up perfect. It sounds excellent and feels amazing, much better than the browns. Using pudding keycaps, lets the light shine right through.

Finally!! you saved my life!! thank you so much... It was just that little botton!! I cant believe it... I spent hours of trying to fix it and it was just that!! omg

hi, thanks for the video. do you need to deassemble entire keyboard to take out a switch? my shift is getting stuck and i want to remove it and look what needs cleaning so that it moves normally

Any advice on how to do this to the K100 Air?

Thanks for the guide. I have a Vulvan Pro I wanted to mod a hit and thought it was just the 3 visible screws + the 2 under the flip-up stands and was wondering what was going on. I guess I know why I can't get it apart now 😢

not sure if i should get the pro or 121 tactile

I'm using Roccat 121 AIMO and my keyboard has one switch is broken the switch stem ("plus" thing), it is red switch. Where do i can buy this Roccat switch for replacing?

That's a great idea to connect 2 of them and make it 180 degree adapter haha

Right how do I get 12 ports? I need more 4 more fan port. What do I do?

I would also like to be sure on how many RGB headers I need on the motherboard as you said, you need all 3 cables pluged into the motherboard or just 1 5V header

now that controller on/ there web site say's it can run only 5 fans recommended your running 7 and it still works will it work with 6 tough fans 14 RGB new ones/ I would like to run all 6 on one controller, will that work, and will it show up on the TT RGB plus software also?

Could you also just cut the cable (as close to the keyboard as possible) and connect it to a let’s say coiled cable?

Thanks for this guide, because of wear and tear some of my Roccat Vulcan switches starting failing and this helped massively. Tore down the keyboard and replaced the affected switches and now everything works again. Again much thanks!

Can you control an inbuilt led light on a pwm fan? My fan has an inbuilt light I’d like to turn on and off

Where can i buy the roccat titan mechanical switches? Is there a way to buy them?

Where can i buy the roccat titan mechanical switches? Is there a way to buy them?

You can heat the Display on the middle front with a heatgun and lossen the glue, which is only a tape 2-3mm around th edge and than pry it open with a razorblade. thats what i did and it worked. so no breaking any plastic.

Rocat Swarm Function keys not working - specifically the F5, F6, F8 - I can confirm they are set in the app to lower, higher and mute but they do not work. Can someone please help? I hope I am explaining properly =)